How To Make a Tire Swing

Estimated reading time: 4 minutes

Few childhood memories are as enduring as the simple joy of swinging on a tire swing. The thrill of the wind in your hair and the sensation of soaring through the air are timeless experiences that children cherish. If you’re looking to bring this classic outdoor pastime to your backyard, you’re in luck. In this detailed guide, we’ll walk you through the steps of crafting your very own tire swing. Get ready to create lasting memories for your family and provide a delightful addition to your outdoor play area.

tire swing swnig set
how to make a homemade tire swing

Materials You’ll Need:

  • Tire: The heart of your tire swing is, of course, the tire itself. Choose a sturdy and clean tire that’s free from sharp edges or protruding wires. Most people opt for a recycled automobile tire due to its durability.
  • Rope: Select a strong, weather-resistant rope that can support the weight of both the tire and the rider. Nylon or polypropylene rope is often recommended.
  • Swivel Hardware: For added safety and stability, consider using a swivel hardware kit. This ensures the tire swing can rotate smoothly without twisting the rope.
  • Carabiner: A carabiner or similar connector can be used to secure the rope to the swivel and tire. Ensure it has a load-bearing capacity that exceeds the weight of potential users.
  • Drill with Bits: You’ll need a drill with bits suitable for drilling holes through the tire and any necessary attachment points.
  • Eye Bolts: If you plan to hang the tire swing from a tree branch, you’ll need eye bolts and corresponding washers and nuts for secure attachment.
swing set with tire swing

Step By Step Guide

1. Cleaning and Preparation: Begin by cleaning the tire thoroughly, removing any dirt, debris, or residue. Inspect the tire for any sharp edges or protruding wires. If you find any, use a file or grinder to smooth them out.

2. Drilling Holes: Determine where you want the rope attachment points on the tire. Commonly, two holes are drilled near the top edge of the tire, on opposite sides. Use your drill and appropriate bits to create these holes. Make sure they are large enough to accommodate the rope and allow for easy threading.

3. Attaching Eye Bolts: If you’re hanging the tire swing from a tree branch, install the eye bolts on the branch, ensuring they are firmly secured. Thread the rope through the eye bolts, creating the connection point for the tire swing.

4. Securing the Swivel: If you’re using a swivel, attach it to the rope above the tire. This hardware enables the tire swing to rotate freely without twisting the rope.

5. Threading the Rope: Thread one end of the rope through one of the tire’s holes, pulling it through until the tire rests at the desired height. Repeat the process for the second hole, ensuring the tire is level. How to make a tire swing with rope is part of the process.

6. Tying Knots: Tie secure knots at the ends of the rope to prevent it from slipping back through the tire holes. Consider adding a carabiner or connector for extra security.

7. Safety Check: Before anyone uses the tire swing, perform a safety check to ensure all knots, hardware, and connections are secure.


With your homemade tire swing ready for action, you’ll be providing endless entertainment for your family and creating memories that will last a lifetime. If you need any additional assistance or have questions about making a tire swing, feel free to reach out to Kids World Play System’s services or contact them for expert guidance. Now, it’s time to enjoy the thrill of swinging in the great outdoors!